2015.04.01 20:11 MeisterX News, Events, and Talk about New Port Richey, Florida
2012.01.02 20:27 keagator Pasco County Florida
2021.12.05 19:01 emmgiann Kathleen Moore - MISSING - Pasco County, FL
2023.06.10 01:40 colonelhumps ASUS ROG STRIX Z490 and Wifi 6
![]() | Hey everyone, I'm apologize if this isn't the right place for this, but I'm having issues with my wifi connection. submitted by colonelhumps to pcmasterrace [link] [comments] The TL:DR is that after moving and getting a new isp, I'm having wifi issues with my pc exclusively. Everyone else is connected just fine. I should be getting up to 1.2gb download but I'm suffering at around 7mbs. After some research, I noticed that I now have wifi-6 internet, my pc is compatible, and I have a wifi-6 adaptor port on the back on my pc from the motherboard that's in the title. See picture. I have never connected any antenna or signal boosters, but I didn't know if I needed to buy any wifi-6 chips for my M.2 slots like how guides have told me. Please help. |
2023.06.10 01:37 thunderbeans Ryzen 7 5700G - Usb / PCIe Reset Issue
1). Replaced the motherboard with a new board of the same make/model (MSI B550M VDH WIFI).None of these fixed the issue. The only way I can get my devices to stop resetting as often is to plug each one into the ports on the motherboard rather than the hub, or to not use my graphics card.
2). Replaced the motherboard with a new board of different make/model (ASUS B550-F WIFI II).
3). Installed latest BIOS firmware and Chipset drivers for each motherboard.
4). Reinstalled windows multiple times.
5). Replaced 500W PSU with 650W PSU.
6). Tried using powered hub on 3 other machines (2 laptops, 1 desktop)
7). Tried using other powered and non-powered usb hubs.
8). Tried using the hub with a single device attached, and with multiple devices attached.
9). Tried all the usb ports on each motherboard.
10). Tried multiple graphics cards (Geforce 1070 ti, Geforce 3060 ti)
- specs - Ryzen 7 5700G 3801 Mhz MSI B550M VDH WIFI GEFORCE 3060 TI CRUICIAL 8GBx2 DDR4 500W PSU
2023.06.10 01:36 GodderDam CM Server config: How do I make Live Conditions work?
![]() | submitted by GodderDam to assettocorsa [link] [comments] |
2023.06.10 01:33 Accomplished_Boot799 CarPlay in 2013 Nissan Murano SL
2023.06.10 01:31 AutoModerator [Genkicourses.site] ✔️Andrea Unger – Master the Code & Go LIVE ✔️ Full Course Download
![]() | ➡️https://www.genkicourses.site/product/andrea-unger-master-the-code-go-live/⬅️ submitted by AutoModerator to GenkiCourses_Cheapest [link] [comments] Get the course here: [Genkicourses.site] ✔️Andrea Unger – Master the Code & Go LIVE ✔️ Full Course Download https://preview.redd.it/iyruiy4m5x4b1.png?width=600&format=png&auto=webp&s=a3cf60f3e2da45e001383bdc062bb6732e720329 Courses proof (screenshots for example, or 1 free sample video from the course) are available upon demand, simply Contact us here Code Your Strategies & Create Your Automated Trading Infrastructure Here’s What You’ll Get: Video Lectures A series of Pre-Recorded Video Lectures you’ll always have access to that you can follow them at your own pace, on how to code your trading systems, and set up your automated trading infrastructure (data-feed, broker, platform, VPS). Functions & Indicators Scripts The scripts of tens of functions & indicators we use for our own day-to-day trading. You’ll get all the peculiar bits of coding needed to boost your trading. From FOMC reports dates to daylight saving time adjustments, position sizing algorithms, optimization-ready codes, etc. Everything is already coded for you so you can concentrate on what matters: analyzing the markets to get new ideas for effective trading systems. Strategies Open Code The 13 volumes with over 200 strategies, at your disposal: you can select the best systems, modify them, and adapt them to your needs. Stefano Serafini – Unger Academy’s student and winner of the World Cup Championship of Futures Trading® 2017 TABLE of CONTENTS
|
2023.06.10 01:31 InspectorShuriken In the Chic-Choc park in Gaspésie, Canada, a spot right in the middle of the mountains looks like a spurce.
![]() | submitted by InspectorShuriken to geography [link] [comments] |
2023.06.10 01:20 Terraria_lover Can I use a PlayStation 4 Controller on the PC without having to use a USB Cable, just using it wirelessly?
2023.06.10 01:15 specu12 (OFFER) US codes list, also large selection of Canadian and UK Google Play movies (REQUEST) Offers, mostly itunes
2023.06.10 01:10 skinsshorts CS2 Access.
2023.06.10 01:09 Akki_MH3U How to get weak/low HP monsters (healthlock)
![]() | We've previously seen how to spawnlock an area, how to crownlock a small monster size and how to combine these two locks for your speedruns. submitted by Akki_MH3U to MonsterHunter3U [link] [comments] Now that you learnt how to get those, it's time to learn how to get the next lock, the healthlock. This is the second hardest lock in the game after the staminalock (we are gonna talk about it in another post). Why is that hard? Because it's very easy to get it but at the same time it's very easy to lose it. So you have to be careful about all the following steps to make it work and most importantly to keep it as long as you can. As we already said in the Felyne Weakener post, in MH3U every time you start a quest you have a specific percentage to get one of the 5 individuals of the game (-2, -1, 0, +1, +2). The chances to get these individuals are the following: -2 (5%), -1 (10%), 0 (70%), +1 (10%), +2 (5%). -2 monsters are the weakest meanwhile the +2 are the strongest. Now we are gonna learn how to always get a -2 monster for your speedruns and in order to kill faster your preys. I'm gonna explain you in the paragraphs below how to measure the monsters HP and how to distinguish a -2 individual from a +2. The first thing to do is being sure to have the proper equipment for this lock. Indeed you will need the weapon God's archipelago LBG (accessory silencer), an armor set that provides you Recoil-2, Trap master and Bomb Boost and last but not least you will always have to eat for Felyne Pyro. In the pouch you will need 10 gunpowder, 10 large barrels, 3 Large barrel bombs, 2 Large Barrel Bombs+, 1 Small barrel bomb, 10 felyne bombs, a shock trap, all the combo books, 4 sleep ammo Lvl2 and of course the attack charms (Power talon, power charm) to boost your atck. Once you got everything you need, save the game in order to be sure to don't lose the pouch and the equipment. Now the process begins. 1) Go to Tanzia, pick the canteen quest Low rank Lagombi (first star quests). Eat for Felyne Pyro (if you don't get it pick a quest, reset the food and eat again till you have it. It's extremely important). Once you have Pyro go in quest. 2) Now that you are in the Lagombi quest we have to measure his HP by placing a precise number of bombs in order to kill it. By the number of bombs used to kill it we'll understand which individual is it. -2 individuals need 9 large bombs + 1 small bomb to die, -1 individuals need 9 large bombs + 3 small bombs to die, 0 individuals need 9 large bombs + 6 small bombs to die, +1 individuals need 9 large bombs + 9 small bombs to die and finally +2 individuals need 9 large bombs + 11 small bombs to die. You can actually see that there 10 small bombs of difference between a +2 and a -2 individual. (The difference in terms of damage is about 2 large barrel bombs because 5 small bombs equal 1 large bomb). We are gonna aim for the weakest indeed. Why do we use bombs to measure HP? Because they have a fixed damage so there's no risk that other elements will change the damage received from the monster resulting in an inaccurate measurement. 3) Third Step is learning the strategy on how to measure the HP and kill the lagombi very fast. The first thing to do is to put it asleep (don't worry we use sleep ammo that don't make any kind of damage so we can measure the HP precisely). Once it is sleeping we are gonna place 2 bombs+ at the head and the shock trap a bit far away from his back. It doesn't have to be very close to the monster because we want to wake him up and make it falling into the trap with the flinch deriving from the explosion of the bombs. So once you set the bombs and the trap far away, we use a felyne bomb to detonate (felyne bombs don't make damage so they are perfect to understand how many HP a monster has). After detonating those 2 bombs+ we are gonna place immediately other 2 large bombs at the head of the lagombi while it is screaming and detonate those two again with another felyne bomb to make it falls into the shock trap. Place 2 other bombs and detonate with a felyne bomb, repeat again with other 2. So right now we are at 8 large bombs placed, we need to place a last one to reach the number 9. Last but not least we are gonna set 1 small bomb to kill it. If it dies after 9 large bombs and a small one we got our -2! Great! If not quit the quest by saving and repeat the process from the first step. 4) Now that we know we got a -2 individual we get into the hardest part of this lock. How to keep it without losing it. First thing to do after the -2 lagombi died is quitting the game without saving. Restart the game and go to your bedroom in Moga Village. Don't absolutely go to the port, marina, Tanzia after you got the -2 because there's a risk of losing it. Once you are in your bedroom you can change the set, equipment you need for your hunts and save in bed. It's extremely important to save here, in bed, and not in Tanzia or somewhere else. Quit the game without saving after saving in bed. Now the -2 individual is locked. In order to don't lose it you won't have to save anymore. Outside of your bedroom. If you save somewhere else there's the risk of losing it. Also this lock sometimes get lost in the process if you wait too much time in the lobby without going in a quest. And also there's a risk of losing if you change your equipment again after the one that you saved before in bed. That's it! If you followed all the steps correctly you should have locked a -2 individual and your next monster that you are gonna hunt is gonna be weaker than the others! In the next post I will teach how to combine all the 3 locks. Spawnlock+crownlock+healthlock. But for the moment I think it's better that you make some practice with this one since it's not very easy to keep it. An important note This healthlock only works for single monster quests. This lock doesn't work for advanced quests, multiple monsters quests, arena quests, elder dragons and village. Village currently have a separate healthlock. (If you want I can explain you how to healthlock in Village too in the next post :)) Fun fact about this lock: the healthlock was discovered for the first time by a group of japanese players in MH Portable 2G/Freedom Unite. The new generations of hunters just took the same principle and applied in the new mh games by finding different ways to measure the HP. In MHFU, for example ,they didn't use a Lagombi to measure the HP but a Yian Garuga. |
2023.06.10 01:05 streetkilln USA PC Chernarus RedDawn NoobFriendly StartingGear Traders Loot++ Airdrops++ BBP Groups Helis BedSpawn SpawnSelect Leaderboard DogCompanion
DayZ: RedDawn is a new DayZ server that is looking to build a amazing community of players, The server is aimed to be noob friendly and nontoxic and provides a bunch of useful addons!
2023.06.10 01:04 Hedgehog_5150 Janissary: The Joy Ride Ch8
2023.06.10 00:59 whycomposite Death Crimson lightgun, maybe something I'm missing.
2023.06.10 00:59 ShadySeptapus Questions on TerraMaster D5-300
2023.06.10 00:58 ElegantSwordsman Hybrid or electric sedan suggestions among my several specific wants (see post)
2023.06.10 00:58 samalander Trying (and failing) to use Cloudflare Tunnels with Foundry 11
2023.06.10 00:57 angelajacksn014 Need Replacements?
2023.06.10 00:49 NoU4206911 [USA-IN] [H] GPU VerticalMount, Fans, Watercooling, Modded Keyboard + Accessories, ATH M50X, Wacom Intuos CTH-480 [W] Paypal, Local Cash
LINKUP - EZ Vertical GPU Bracket (Gen4x16) | https://www.amazon.com/LINKUP-Vertical-Bracket-Graphic-Holdedp/B091Q95ZXM?th=1 | Apparently this is relatively universal, but I haven't looked for a list of compatible cases. I do not have the original box or any theoretical accessories. | Looking to sell locally, bundled with the case. Otherwise, I'd ask $50 Local or $60 shipped |
Arctic P12 PWM PST | https://www.amazon.com/ARCTIC-P12-PWM-PST-Connessione/dp/B07GJGF56L/ref=sr_1_3?crid=3I5FKDOJ9ZYG0&keywords=Arctic+p12+pwm+pst&qid=1685755682&s=industrial&sprefix=arctic+p12+pwm+ps%2Cindustrial%2C98&sr=1-3 | Used these for a couple years. Came together in a pack of 5. From what I can recall, one of them has an inconsistent bearing, but maybe it was just a symptom of my case and vertical mount placement. These were cleaned well, before posting. | Hoping to bundle all of these, but I suppose I'd sell these separately for $20 shipped |
---|---|---|---|
Arctic P12 PWM PST (SLIM) | https://www.amazon.com/ARCTIC-P12-Slim-PWM-PST/dp/B08QDKGCCW?th=1 | Used two of these for a couple years, but one is brand new. These were cleaned well, before posting. | Hoping to bundle all of these, but I suppose I'd sell these separately for $20 shipped |
ID-Cooling NO-12015-XT ARGB | https://www.amazon.com/ID-COOLING-Cooling-Cooler-Raidator-Chassis/dp/B09Z65X5RW | Used two of these for a couple years, but one is brand new. These were cleaned well, before posting. These also come with aftermarket spacers in case you want to mount them as intake on certain cases that cause issue. One of them has some yellowing in the center of the fan that can be seen if RGB is used. | Hoping to bundle all of these, but I suppose I'd sell these separately for $25 shipped |
Thermalright TL-C12C-S X3 | https://www.amazon.com/dp/B0BKKFBR9R | Brand new. | These are too cheap to bother selling separately, but I will gladly bundle them. |
CoolerMaster MF120 Halo | https://www.amazon.com/dp/B081W8Y4F7 | Brand new. | Hoping to bundle all of these, but I suppose I'd sell this separately for $20 shipped |
Noctua NF-F12 Redux 1700RPM | https://www.amazon.com/Noctua-redux-1700-high-Performance-Award-Winning-Affordable/dp/B07CG2PGY6/ref=sr_1_3?crid=AK0SHCM09GKJ&keywords=NF-F12+redux&qid=1685755822&s=electronics&sprefix=nf-f12+redux%2Celectronics%2C94&sr=1-3 | Used, but perfectly functional and clean, 120mm PWM Pressure optimized fan. Includes the multi-colored anti-vibration pads. Apparently the P12 is the budget variant of the F12, but they're probably close to identical. | Hoping to bundle all of these, but I suppose I'd sell this separately for $15 shipped |
Alphacool NexXxoS ST30 Full Copper 360mm Radiator | https://www.amazon.com/Alphacool-NexXxos-Copper-Radiator-Triple/dp/B007R79E60 | I used this once or twice over the span of 2 years, with clear fluids. It has a bit of discoloration in the exterior fins, but it worked fine for me. I flushed it recently with my hose and shook it quite vigorously, but you may want to do your own cleaning anyways. | I'm hoping to bundle most of this watercooling gear; otherwise, I'd sell this separately for $30 local, or $40 shipped |
---|---|---|---|
EKWB Coolstream Classic PE 360 | https://www.ekwb.com/shop/ek-coolstream-classic-pe-360 | I used this for 2 years with clear fluid, but there was some plasticizer leach from my soft tubing. I tried my best to clean it via flushing with the above method, but you might want to do your own cleaning anyways. | Otherwise, I'd sell for $55 local, or $65 shipped |
EK-Loop Leak Tester Flex | https://www.ekwb.com/shop/ek-loop-leak-tester-flex | I don't think this was used more than a single time. I bought it second hand, but I was told it had been purchased in March. I already have a Barrow leak tester. | Otherwise, I'd sell for $20 local, or $25 shipped |
EK-UNI Pump Bracket (120mm FAN) Vertical | https://www.ekwb.com/shop/ek-uni-pump-bracket-120mm-fan-vertical | I can't recall how much use this saw, probably a couple builds. Has a bit of cosmetic damage. | Bundle only |
EK-UNI Pump Bracket (140mm FAN) Vertical | https://www.ekwb.com/shop/ek-uni-pump-bracket-140mm-fan-vertical | I can't recall how much use this saw, probably a single build. Might have a bit of cosmetic damage. | Bundle only |
XSPC G1/4" Plug with 10k Sensor - Chrome | https://www.performance-pcs.com/water-cooling/fittings-connectors/xspc-g1-4-plug-with-10k-sensor-chrome-xspc-g14-10k-sensor-ch.html | Brand new | Otherwise, I'd sell for $12 shipped |
Thermaltake Pacific C-PRO G1/4 16mm (5/8") OD Compression – Chrome (6 total) | https://www.thermaltake.com/pacific-c-pro-g1-4-petg-tube-16mm-od-compression-chrome-6-pack-fittings.html | bit of plasticizer leach, but still fully functional. | Otherwise, I'd sell for $20 local, or $30 shipped |
Thermaltake Pacific G1/4 16mm (5/8”) OD Compression – Chrome (6 total) | https://es.thermaltake.com/thermaltake-pacific-g1-4-petg-tube-16mm-5-8-od-compression-chrome.html | Don't think these were used much at all. | Otherwise, I'd sell for $20 local, or $30 shipped |
G1/4" Black Sparkle Rotary 90-Degree Extender (7 total) | https://shop.bitspower.com/index.php?route=product/product&product_id=643 | Used throughout a few builds, bit of cosmetic damage or plasticizer leach. | Otherwise, I'd sell for $30 local, or $40 shipped |
Corsair Hydro X Series, 90° Rotary Adapter - Chrome (4 total) | https://www.amazon.com/Corsair-Durability-Securely-Rotation-Mechanism/dp/B07WJVDNBB | Used throughout a few builds, bit of cosmetic damage if anything. | Otherwise, I'd sell for $15 local, or $20 shipped |
Corsair Hydro X Series, Dual G1/4" 90-Degree Extender | I don't know what the hell this monstrosity is. Maybe it is corsair, maybe it isn't. | Only time I ever made use of this was when I needed to plumb a ball valve drain (they typically have a female g1/4). Has lots of cosmetic damage from attempting to remove the other end. The colors don't even match LOL. | Bundle only |
Bitspower G1/4" Extender-30MM - Chrome (2 total) | https://shop.bitspower.com/index.php?route=product/product&product_id=2309 | One is basically brand new and the other has a not so insignificant amount of plasticizer leach I cannot remove with soapy water. | Bundle Only |
Bitspower Rotary Fitting "Q" - 360 Degree Water Cooling Accessory | https://www.performance-pcs.com/water-cooling/fittings-connectors/bitspower-rotary-fitting-q-360-degree-water-cooling-accessory-black-sparkle-finish.html | Bit of plasticizer leach in the top g1/4 threads. | Bundle Only |
Alphacool 2-Way Ball Valve G1/4 | https://www.amazon.com/Alphacool-17141-Black-Hardware-Cooling-Accessory/dp/B015YRMCPO | Used this in a couple builds. bit of cosmetic damage but fully functional and clean. | Bundle Only |
EK-Quantum Torque Drain Valve | https://www.ekwb.com/shop/ek-quantum-torque-drain-valve-black | Probably also only used once. Bought with the EK leak tester. | Bundle Only |
EK-Quantum Torque 90 Degree Rotary - Nickle (6 total) | https://www.ekwb.com/shop/ek-torque-angled-90-black | One of them has a bit of cosmetic staining | Bundle Only |
Primochill Liquid Utopia | https://www.primochill.com/products/primochill-liquid-utopia-15ml-bottle | Bought this recent from frozencpu's sale but there doesn't appear to be a way to identify any manufacturers date. | Bundle Only |
NZXT Kraken G12 GPU Cooling Bracket | https://nzxt.com/product/kraken-g12 | Came with some other stuff I bought, but I'll never use this. It is used, and I did my best to clean it up. | Otherwise, I'd sell for $15 local, $25 shipped |
upHere GPU Anti-sag brace | https://www.amazon.com/upHere-Graphics-Anodized-Aerospace-Aluminum/dp/B076GYL25H | Used a couple times; cosmetic damage where the screw sits. | Bundle Only |
2023.06.10 00:44 that1ginge21 New Map!! Door County!! Custom items galore!! Fair Play” US pc PvP & PvE servers!! 4 maps total!!
2023.06.10 00:42 mrbuzo Why my car doesn’t have charging port ?
![]() | I got a new legacy and it doesn’t seem to have any charging port just one usb port submitted by mrbuzo to subaru [link] [comments] |
2023.06.10 00:41 Longjumping-Food-443 How to delete porting Kit
2023.06.10 00:39 nablasquaredg [FS] [EU-DE] Rare Mellanox SX6720 36x56G x86 switch with BBUs, Ruckus R730 5GBit Enterprise Wifi 6 (802.11ax) Access Point